Back to Blog
How To Remove A Pool From Backyard
If you want to remove a pool from your backyard, then you need to hire a professional who can help you do the job right. Removing any type of pool from the yard can be dangerous, and therefore, hiring a professional is always recommended. There are many things that demolition companies do better than ordinary homeowners, such as removing pools properly and making sure that no damage occurs during the process. This is done by using the most appropriate type of equipment, knowing the different kinds of pool material, and prioritizing debris removal.
The first step is to remove all the leaves and debris from around the pool or your yard. Next, cut off any branches that are close to the pool. Then, dig out the dirt under the concrete foundation and remove the concrete blocks, whether it's an inground pool or above-ground pool. Finally, pour some clean water into the pool until it reaches the bottom of the block. This should be enough to dissolve the cement without causing drainage issues.
Swimming Pool Removal from the Yard or Garden
If you have decided to remove a pool from the backyard of your home, here are some tips on how to go about it:
1. Hire an expert – The first thing that you should do when planning to remove a pool from a backyard is to hire a professional. This will ensure that everything goes smoothly without any problems. You don’t want to end up with a damaged pool or even worse, a broken one.
2. Prepare for the project – Once you have decided to remove the pool, you must prepare yourself for the task ahead. Make sure that you gather all the necessary tools and equipment before starting the work. It is also important to make sure that there is enough space in your yard where you can place the pool once it has been removed.
3. Get rid of the old pool – Before you start removing the pool, you must get rid of the old one. This would prevent any possible accidents or injuries while doing so. Also, if you plan to use the old pool for other purposes, you might as well dispose of it now.
4. Plan the removal – When removing a pool, you must plan carefully what needs to be done. For example, you may need to dig down deep into the ground to remove the pool completely. In addition, you may need to remove the concrete around the pool as well.
5. Start digging – After you have prepared yourself for the project, you must begin digging. This will allow you to easily access the pool. However, you must take care not to damage the surrounding area.
6. Dispose of the debris – Once you have dug out the pool, you must dispose of the dirt and debris. Doing this ensures that you won’t leave behind any waste after the project is over.
7. Clean the area – Once you have finished disposing of the dirt and debris, you must clean the area thoroughly. This way, you can avoid leaving any messes behind.
8. Place the new pool – Once you have cleaned the area, you must start placing the new pool. This will ensure that you don’t have any issues with water leakage.
9. Finish the project – Finally, you must finish the project by sealing the pool properly. This will ensure that no moisture gets inside the pool.
10. Enjoy the benefits – Now that you have successfully removed a pool from your backyard and placed the new one, you can enjoy the benefits. You can now relax knowing that your pool is safe and secure.
Partial Removal of Swimming Pools
The above-mentioned methods are suitable for those who wish to remove only part of their swimming pools. If you want just a partial removal of your pool, then you can follow these steps:
1. Cut off the top of the pool – First, you must cut off the top of the existing pool. This will give you easy access to the rest of the pool.
2. Dig out the bottom of the pool – Next, you must dig out the entire base of the pool. This will help you to remove the pool safely.
3. Seal the hole – Once you have completed the process, you must seal the hole using waterproof material. This will ensure that any moisture doesn’t seep through the pool.
4. Replace the pool – Once the process is complete, you must replace the pool. This will ensure safety and security in the future.
Complete Pool Removal
If you want complete removal of your swimming pool, then you should follow these steps:
Step 1 – Preparing for the job
Before you start removing the pool completely, you must first prepare yourself for the task. Make sure that you have gathered all the necessary tools and materials. These include a shovel, pickaxe, wheelbarrow, a ladder, a hose, gloves, goggles, and a protective suit.
Step 2 – Removing the old pool
After preparing yourself, you must start removing the old pool. The easiest method of doing so is to use a pickaxe. Using this tool, you can easily break apart the concrete.
Step 3 – Digging out the old pool
Once you have broken up the concrete, you must continue digging out the old pool. In order to do this, you must use a shovel or a pickaxe. It is important that you dig down deep enough so that you can reach the pipes.
Step 4 – Sealing the hole
You must also make sure that you seal the hole where the pool used to be. For this purpose, you can use a cement mixture. You can either mix it on your own or hire someone else to do it for you.
Step 5 – Replacing the pool
Finally, you must place the new pool. You can either buy a readymade pool or build one yourself. Either way, you need to ensure that you cover the hole carefully so as not to leave any traces of moisture behind.
Removing a Pool Enclosure Without Obstructing Your Lawn or Landscaping
In some cases, people may find it difficult to remove a pool enclosure without damaging their lawn or landscaping. A safe demolition must be the top priority of an experienced pool removal contractor in such a labor-intensive project. However, there are several ways to remove the structure without causing damage to your property. Here are some of them:
Benefits of Pool Removal
There are many benefits associated with ground pool removal. Some of these include:
1) Safety – There are times when you will want to remove the pool because it is unsafe. This includes pools that are leaking, those that are too close to buildings, etc. When you take care of this problem, you can save your family from potential injuries and the average cost of repairs.
2) Average cost savings – The cost of removal of the pool from your backyard space is cheaper than repairing it. Therefore, you will save more money if you decide to remove your pool instead of fixing it and putting up your existing pool equipment for sale to future buyers, like diving boards, pool accessories, garden hose, etc.
3) Health – The gallons of water inside a pool with dirt have been known to cause health problems due to a lack of organic matter flowing through it and potential hazards from the filled-in pool floor. As a result, removing the pool will eliminate all of these issues.
4) Time – Removing any type of swimming pool takes less time than repairing it. Therefore if you choose to remove it, you can save a lot of time because you won't have to clean pool walls and worry about improper drainage anymore.
5) Space – Even if you have a big backyard, you might not have enough pool space. In such a case, you should consider removing it and start planning for your backyard landscape design needs. You might need lawn care service to plan for future structures across the space.
6) Maintenance – Pool restoration costs are much higher than that of a spa. Therefore, if you want to avoid maintenance costs that can be a heavy burden, you should consider a complete pool removal as a more affordable option.
7) Appearance – If you have beautiful yard space, you don’t want to ruin it by installing a pool. For this reason, you should remove the existing one before you start planting new plants for your vision of landscape design. It could also attract potential buyers if you're planning to sell your home.
8) Cleanliness – Swimming pools are great places for kids to play. However, they are also an expensive option that can result in attracting mosquitoes and other insects that make your home dirty. Therefore, if you have a pool, you should clean it regularly.
Do You Need a Permit for a Swimming Pool Removal Project?
If you want to remove a swimming pool with water from your property, then you need to obtain a permit. The permit process varies depending on where you live, but generally speaking, the city or county requires that you submit a written application describing what you plan to do, pay a fee, and wait for the approval. Once you receive the permit, you must notify neighbors about the project, and you may be required to post signs along the way.
Engineers to Deal with Drains, Septic Tank, or Concrete Pool Deck
When removing a pool, you will need to deal with drains, concrete walls, heavy equipment, pool water, septic tanks, and concrete pool decks. These issues require professional assistance because they are indeed very complicated projects. Before you begin working on these projects, you should contact an engineer who specializes in dealing with pool removal requirements, like plumbing and drainage issues. A licensed engineer will provide you with advice regarding how to proceed and whether you need permits before starting the job.
Swimming pools are great places to relax and enjoy yourself, but it is important that you take care of them properly so that you can keep them safe and clean. When you finally decide on a swimming pool demolition, you will need a good demolition contractor to help you out. Of course, you would need to consider different factors such as fixing the drains, the method of pool removal, the form of pool demolition for your property, and the labor costs. This article provides information that will help you choose the right one from a wide range of pool demolition contractors for your needs, not just to remove the pool from your green lawn, but also to increase your backyard space and obtain more landscaping opportunities.